Hydro-Mix XT-FS Flush mount, food safe digital microwave moisture sensor
Installation and Mounting
Comprising a single, intelligent unit that contains all on-board functionality including signal processing and averaging, the Hydro-Mix XT-FS accurately measures the moisture content of material passing over the ceramic faceplate.
The sensor has a flange mounting to allow installation onto the fixing plate and seals with an O-Ring.
The sensor has an integrated 4m cable which is prepared to terminate in a junction box or other suitable panel.
Installation into Hoppers, Mixers or Conveyors
The Hydro-Mix XT-FS can be mounted in many different locations where there is a continuous flow of material across the ceramic faceplate. These include hoppers, ducting, conveyors and mixer systems.
Single/Twin Shaft Mixers
The Hydro-Mix XT-FS should ideally be positioned on the end wall of the mixer, 30° from vertical and on the upstroke of the blade.
The Hydro-Mix XT-FS is positioned on the upstroke of the blade at 30° from vertical.